二次离子电池高比容量负极碳载体的研究进展

二次离子电池商业化负极石墨的比容量已接近理论比容量. 合金型负极和金属负极因具有高比容量而受到广泛关注, 但其循环性能差和安全性问题限制了实际应用, 据此提出载体设计策略. 碳材料具有来源广泛、 易于调控等特性, 常用作二次离子电池高比容量负极的载体. 本文从碳载体的孔结构、 比表面积、 电子导电率、 离子导电率、 杂原子掺杂和界面修饰的角度出发, 综述了其在硅基、 磷基、 锗基、 锡基负极以及金属锂、 钠等负极中的研究进展, 展望了碳载体的发展前景和方向.     

锂离子电池硅氧化物负极首次库伦效率的影响因素与提升策略

硅氧化物(SiO_x, 0<x≤2)具有高的比容量和低的嵌锂电位, 且体积膨胀率显著低于纯硅负极, 因而被认为是替代传统石墨负极材料的理想选择之一. 然而SiO_x负极在首次嵌锂过程中表面形成的固体电解质界面膜(SEI)以及大量的不可逆产物, 造成其首次库伦效率偏低, 严重阻碍了SiO_x负极的实际应用. 本文从SiO_x的结构模型出发, 系统阐述了SiO_x负极的嵌锂机理以及首次库伦效率低的原因; 归纳了SiO_x负极首次库伦效率的提升策略及其研究进展; 并对提升SiO_x负极首次库伦效率的未来发展方向进行了展望.     

固相烧结法制备锂离子电池正极材料Li2FeP2O7及其电化学性能研究

介绍了一种先冷冻干燥后固相烧结制备正极材料Li₂FeP₂O₇的方法. 利用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和傅里叶变换红外光谱(FTIR)对材料的组成和形态进行表征, 并通过循环伏安曲线(CV)和电化学阻抗谱(EIS)研究了Li₂FeP₂O₇材料的电化学性能. 研究发现, 合成Li₂FeP₂O₇的最佳温度为590 ℃, 此温度下反应较完全且产物杂质较少, 1.6C倍率下的放电比容量达到55 mA·h·g^?1, 明显高于其它温度下合成样品的放电比容量. 该温度下合成的Li₂FeP₂O₇还具有低阻抗和较大的交换电流密度, 说明这种合成方式有利于提高锂离子在Li₂FeP₂O₇中的扩散.     

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

An easy and delicate approach using cheap carbon source as conductive materials to construct 3D sequential porous structural Na3V2(PO4)3/C(NVP/C)with high performance for cathode materials of sodium ion battery is highly desired.In this paper,the NVP/C with 3D sequential porous structure is constructed by a delicate approach named as“cooking porridge”including evaporation and calcination stages.Especially,during evaporation,the viscosity of NVP/C precursor is optimized by controlling the adding quantity of citric acid,thus leading to a 3D sequential porous structure with a high specific surface area.Furthermore,the NVP/C with a 3D sequential porous structure enables the electrolyte to interior easily,providing more active sites for redox reaction and shortening the diffusion path of electron and sodium ion.Therefore,benefited from its unique structure,as cathode material of sodium ion batteries,the 3D sequential porous structural NVP/C exhibits high specific capacities(115.7,88.9 and 74.4 mA·h/g at current rates of 1,20 and 50 C,respectively)and excellent cycling stability(107.5 and 80.4 mA·h/g are remained at a current density of 1 C after 500 cycles and at a current density of 20 C after 2200 cycles,respectively).     

Electrospun Nanofibrous Adsorption Membranes for Wastewater Treatment: Mechanical Strength Enhancement

Functional nanofibrous membranes fabricated by electrospinning technology have attracted much attention in the removal of heavy metal ions from contaminated wastewater. The high specific surface area, high porosity and ease of functionality create an enhanced throughput and high adsorption capacity of the nanofibrous membrane. However, the relatively poor mechanical properties of the membrane with a non-woven nanofibrous structure are one of the major concerns, which can limit the applications in wastewater treatment. Different strategies and methodologies were explored to address the problems and were reviewed in this work, highlighting the possibilities of overcoming the poor mechanical properties of the nanofibrous membrane and to ensure the recyclability and reusability of the membrane during the adsorption process.     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

Analytical Modelling of Electron-coupled Ion Transfers with Immobilized vs Soluble Redox Transducer at Thick Film-modified Electrodes

Analytical theoretical solutions are deduced for the current-potential response, concentration profiles and interfacial potentials of electron-coupled ion transfers in the cyclic voltammetry with thick film-modified electrodes. The theory covers a wide variety of possible situations, namely, the redox transducer can be either immobilized on the working electrode or freely diffusing in the organic film, and the ion transfer can be either simple or complicated by homogeneous chemical processes. A comparative and comprehensive study of each case is performed, establishing the key parameters that define the behaviour of the system, as well as guidelines to analyse its electrochemical signal.     

New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Metabolite Profiling and Characterization of LW6, a Novel HIF-1α Inhibitor,as an Antitumor Drug Candidate in Mice

A novel HIF (hypoxia-inducible factor)-1α inhibitor, the (aryloxyacetylamino)benzoic acid derivative LW6, is an anticancer agent that inhibits the accumulation of HIF-1α. The aim of this study was to characterize and determine the structures of the metabolites of LW6 in ICR mice. Metabolite identification was performed using a predictive multiple reaction monitoring-information dependent acquisition-enhanced product ion (pMRM-IDA-EPI) method in negative ion mode on a hybrid triple quadrupole-linear ion trap mass spectrometer (QTRAP). A total of 12 metabolites were characterized based on their MS/MS spectra, and the retention times were compared with those of the parent compound. The metabolites were divided into five structural classes based on biotransformation reactions: amide hydrolysis, ester hydrolysis, mono-oxidation, glucuronidation, and a combination of these reactions. From this study, 2-(4-((3r,5r,7r)-adamantan-1-yl)phenoxy)acetic acid (APA, M7), the metabolite produced via amide hydrolysis, was found to be a major circulating metabolite of LW6 in mice. The results of this study can be used to improve the pharmacokinetic profile by lowering the clearance and increasing the exposure relative to LW6.     

混合型离子交换液相色谱-串联质谱法检测鸡蛋中10种氨基糖苷类药物残留

该研究系统地优化了样品前处理过程及仪器分析中影响氨基糖苷残留分析准确度与灵敏度的各主要因素,建立了鸡蛋中10种氨基糖苷类药物(链霉素、双氢链霉素、潮霉素B、卡那霉素、阿米卡星、妥布霉素、安普霉素、大观霉素、新霉素、庆大霉素)残留量的混合型离子交换液相色谱-串联质谱分析方法。样品经10 mmol/L乙酸铵缓冲溶液(含0.4 mmol/L EDTA和50 g/L三氯乙酸)超声提取,调节pH至6~7后,经PRiME HLB固相萃取柱富集净化,采用SIELC Obelisc R色谱柱分离,以乙腈和1.0%(v/v)甲酸水溶液(含1 mmol/L甲酸铵)为流动相进行梯度洗脱,在正离子、多反应监测模式下经串联质谱仪测定,外标法定量。该方法在5~200 μg/L质量浓度范围内线性关系良好,相关系数(r²)均大于0.99;方法的检出限(LOD, S/N≥3)为2~5 μg/kg,定量限(LOQ, S/N≥10)为5~10 μg/kg。在空白鸡蛋中进行LOQ、20 μg/kg、100 μg/kg 3个水平的加标回收实验,方法的平均回收率(n=6)为68.1%~111.3%,相对标准偏差为1.2%~12.3%。利用该方法对市售的20批次鸡蛋样品进行测定,均未检出目标物。本方法简单、灵敏、准确,可实现鸡蛋中10种氨基糖苷类药物残留的批量检测。